2012 Traverse windows not working from main controls?

This topic is empty.

Viewing 7 posts - 1 through 7 (of 7 total)

Author

Posts
May 4, 2025 at 7:22 pm #263 Reply
Matt
I have a 2012 Chevrolet Traverse. My passenger window will only roll down with the button on the passenger door. The back passenger window will only roll down from the driver’s buttons. Not sure if it’s a messed up electrical issue or if there are bad fuses. Any ideas or suggestions on where to start? Or better yet, what the main issue is?
May 4, 2025 at 7:22 pm #264 Reply
Paul
Skip checking fuses, if windows work then fuses are fine. You need to start with checking power output from master switch and go from there.
May 4, 2025 at 7:23 pm #265 Reply
John
Did the battery die recently? If so, I can tell you a way to reset the windows.
May 4, 2025 at 7:23 pm #266 Reply
Rickity
Start by checking fuses.
May 4, 2025 at 7:23 pm #267 Reply
Charlie
Take it apart using your tube as a guide and replace the control switch. If you can’t replace the control switch, use one from the back door and control that window from your door.
May 4, 2025 at 7:24 pm #268 Reply
Nathan
Rain got it and messed up the switches.
May 4, 2025 at 7:24 pm #269 Reply
Mark
Possibly two separate issues. Master switch and rear passenger switch. To save money, disassembly is required to clean the contacts with deoxit and some sandpaper. If there is still an issue check the door jam wiring. Use a meter or test light to check for power.
Author

Posts

Related Posts:

Viewing 7 posts - 1 through 7 (of 7 total)