What causes clutch failure in 2002 Ford Ranger manual?

Post a Reply

This topic is empty.

Viewing 7 posts - 1 through 7 (of 7 total)

Author

Posts
May 18, 2025 at 4:26 pm #1875 Reply
Casey
I’m working on a Ford Ranger truck 2002 for a neighbor, it’s having clutch issues won’t shift correctly, and it stalls, what part do I need to replace?
May 18, 2025 at 4:27 pm #1876 Reply
Robert
So I ran into something like this I put a clutch pressure plate through a bearing, and then when you want to take off, you would have to grind gears so the way it was finally figured out. He’s having an assistant pump the pedal watch the clutch fork if it bleeds off when holding down the pedal, more than likely, either gonna be the clutch master or the clutch slave cylinder in my case, it was the clutch master.
May 18, 2025 at 4:27 pm #1877 Reply
Wesley
The best way to bleed that clutch is with a Phoenix injector, pushing the fluid from the slave cylinder into the master cylinder. The problem is the angle of the master cylinder.
May 18, 2025 at 4:28 pm #1878 Reply
Dave
Best to get someone with experience to check that out.
A few possibilities there,
Air in system
May require new master or slave cyl
Spigot bearing seized
Rust on splines for friction plate
Clutch fork issue
Work out cheaper to get right diag 1st time
May 18, 2025 at 4:28 pm #1879 Reply
James
The defective one is a good place to start.
May 18, 2025 at 4:28 pm #1880 Reply
Lance
What problem is it having? Be precise! Like when you press the pedal, what do you feel?
May 18, 2025 at 4:28 pm #1881 Reply
Louis
JUST LOAD UP THAT PARTS CANNON AND KEEP FIRING, THEN WHEN YOU ARE OUT OF MONEY, TAKE IT IN FOR DIAGNOSIS AND COMPLAIN ABOUT THE COST OF DIAGNOSIS’
Author

Posts

Viewing 7 posts - 1 through 7 (of 7 total)

What causes clutch failure in 2002 Ford Ranger manual?

Related Posts: