Why can’t I pump gas in my 2013 Avalanche after EVAP fixes?

This topic is empty.

Viewing 7 posts - 1 through 7 (of 7 total)

Author

Posts
May 15, 2025 at 8:51 pm #1693 Reply
Michael
I have a 2013 Avalanche. I’ve changed Charcoal Canister, and solenoid under the hood and the one by the spare tire… and still I can not pump gas… What’s next?
May 15, 2025 at 8:52 pm #1694 Reply
Billy
Michael, forget all the vent lines and EVAP system. If they were causing issues, you could pump several gallons before it caused issues. There is a ball I. The filler hose. There most likely is an issue with that. You’ll have to remove the fill hose.
May 15, 2025 at 8:52 pm #1695 Reply
Everett
Vent filter. Blow out the line that goes to the EVAP vent valve. You’ll likely see a cloud of dust come out under the truck.
May 15, 2025 at 8:53 pm #1696 Reply
Ray
First response is correct, line is full of charcoal from canister to replace canister blow out line.
May 15, 2025 at 8:53 pm #1697 Reply
Brad
Clogged EVAP line up to the engine. Have to unhook it, blow it out with air or totally remove it and bang it on the ground to get all the BBS out.
May 15, 2025 at 8:54 pm #1698 Reply
Branden
Do you have power to those solenoids or did you just throw parts at it.
May 15, 2025 at 8:55 pm #1699 Reply
Rolling
It’s the vent tube on the filler neck.
Author

Posts

Related Posts:

Viewing 7 posts - 1 through 7 (of 7 total)